 
                            
                                            Add to Cart
OPA340UA/2K5 Op Amps Single SOIC-8 Operational Amplifier Chip
| Product Attribute | Attribute Value | 
|---|---|
| Texas Instruments | |
| Operational Amplifiers - Op Amps | |
| SMD/SMT | |
| SOIC-8 | |
| 1 Channel | |
| 5.5 V | |
| 5.5MHz | |
| 6 V/us | |
| 0.5 mV | |
| 2.5 V | |
| - 40 C | |
| + 85 C | |
| 10 pA | |
| 750 uA | |
| No Shutdown | |
| 80 dB to 92 dB | |
| 25 nV/sqrt Hz | |
| OPA340 | |
| Cut Tape | |
| MouseReel | |
| Reel | |
| Amplifier Type: | Low Offset Voltage Amplifier | 
| Height: | 1.58 mm | 
| Input Type: | Rail-to-Rail | 
| Length: | 4.9 mm | 
| Output Type: | Rail-to-Rail | 
| Product: | Operational Amplifiers | 
| Supply Type: | Single | 
| Technology: | CMOS | 
| Width: | 3.91 mm | 
| Brand: | Texas Instruments | 
| In - Input Noise Current Density: | 0.003 pA/sqrt Hz | 
| Moisture Sensitive: | Yes | 
| Operating Supply Voltage: | 2.5 V to 5.5 V | 
| Product Type: | Op Amps - Operational Amplifiers | 
| PSRR - Power Supply Rejection Ratio: | 90.46 dB | 
| Factory Pack Quantity: | 2500 | 
| Subcategory: | Amplifier ICs | 
| Vcm - Common Mode Voltage: | Negative Rail - 0.3 V to Positive Rail + 0.3 V | 
| Voltage Gain dB: | 124 dB | 
| Unit Weight: | 0.002677 oz | 
The OPA340 series operate on a single supply as low as 2.5 V with an input common-mode voltage range
 that extends 500 mV below ground and 500 mV above the positive supply. Output voltage swing is to
 within 1 mV of the supply rails with a 100-kΩ load. These devices offer excellent dynamic response
 (BW = 5.5 MHz, SR = 6 V/µs), yet quiescent current is only 750 A. Dual and quad designs feature
 completely independent circuitry for lowest crosstalk and freedom from interaction.
 The single (OPA340) packages are the tiny 5-pin SOT-23 surface mount, 8-pin SOIC surface mount,
 and 8-pin DIP. The dual (OPA2340) comes in the miniature 8-pin VSSOP surface mount, 8-pin SOIC
 surface mount, and 8-pin PDIP packages. The quad (OPA4340) packages are the space-saving 16-pin
 SSOP surface mount and 14-pin SOIC surface mount. All are specified from –40°C to 85°C and
 operate from –55°C to 125°C. A SPICE macromodel is available for design analysis.
 
  
