CHUANGXINDA ELECTRONICS-TECH CO., LIMITED
CHUANGXINDA ELECTRONICS-TECH CO., LIMITED
Add to Cart
OPA333AIDBVR Operational Amplifier Chip OPA333 SOT-23-5 OPAMP
| Product Attribute | Attribute Value |
|---|---|
| Texas Instruments | |
| Operational Amplifiers - Op Amps | |
| SMD/SMT | |
| SOT-23-5 | |
| 1 Channel | |
| 5.5 V | |
| 350 kHz | |
| 5 mA | |
| 0.16 V/us | |
| 0.01 mV | |
| 1.8 V | |
| - 40 C | |
| + 125 C | |
| 200 pA | |
| 17 uA | |
| No Shutdown | |
| 106 dB to 130 dB | |
| OPA333 | |
| Cut Tape | |
| MouseReel | |
| Reel | |
| Amplifier Type: | Micropower Amplifier |
| Features: | EMI Hardened, Small Size, Zero Drift |
| Height: | 1.15 mm |
| Input Type: | Rail-to-Rail |
| Length: | 2.9 mm |
| Output Type: | Rail-to-Rail |
| Product: | Operational Amplifiers |
| Supply Type: | Single, Dual |
| Technology: | CMOS |
| Width: | 1.6 mm |
| Brand: | Texas Instruments |
| In - Input Noise Current Density: | 0.1 pA/sqrt Hz |
| Maximum Dual Supply Voltage: | +/- 2.75 V |
| Minimum Dual Supply Voltage: | +/- 0.9 V |
| Operating Supply Voltage: | 1.8 V to 5.5 V, +/- 0.9 V to +/- 2.75 V |
| Product Type: | Op Amps - Operational Amplifiers |
| PSRR - Power Supply Rejection Ratio: | 120 dB |
| Factory Pack Quantity: | 3000 |
| Subcategory: | Amplifier ICs |
| Vcm - Common Mode Voltage: | Negative Rail - 0.1 V to Positive Rail + 0.1 V |
| Voltage Gain dB: | 130 dB |
| Part # Aliases: | HPA00141AIDBVRG4 |
| Unit Weight: | 0.000222 oz |
The OPAx333 series of CMOS operational amplifiers use a proprietary auto-calibration technique to simultaneously provide very low offset voltage (10 µV, maximum) and near-zero drift over time and temperature. These miniature, high-precision, low quiescent current amplifiers offer high-impedance inputs that have a common-mode range 100 mV beyond the rails, and rail-to-rail output that swings within 50 mV of the rails. Single or dual supplies as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V) can be used. These devices are optimized for low-voltage, single-supply operation.
The OPAx333 family offers excellent CMRR without the crossover associated with traditional complementary input stages. This design results in superior performance for driving analog-to-digital converters (ADCs) without degradation of differential linearity.
The OPA333 (single version) is available in the 5-pin SOT-23, SOT, and 8-pin SOIC packages, while the OPA2333 (dual version) is available in the 8-pin VSON, SOIC, and VSSOP packages. All versions are specified for operation from –40°C to 125°C.
