CHUANGXINDA ELECTRONICS-TECH CO., LIMITED
CHUANGXINDA ELECTRONICS-TECH CO., LIMITED
Add to Cart
OPA4314AIPWR Operational Amplifier Chip OPA4314 SSOP-14 OPAMP
| Product Attribute | Attribute Value |
|---|---|
| Texas Instruments | |
| Operational Amplifiers - Op Amps | |
| SMD/SMT | |
| TSSOP-14 | |
| 4 Channel | |
| 5.5 V | |
| 3 MHz | |
| 20 mA | |
| 1.5 V/us | |
| 2.5 mV | |
| 1.8 V | |
| - 40 C | |
| + 125 C | |
| 10 pA | |
| 150 uA | |
| No Shutdown | |
| 66 dB to 80 dB | |
| OPA4314 | |
| Cut Tape | |
| MouseReel | |
| Reel | |
| Amplifier Type: | Low Power Amplifier |
| Features: | EMI Hardened |
| Input Type: | Rail-to-Rail |
| Output Type: | Rail-to-Rail |
| Product: | Operational Amplifiers |
| Supply Type: | Single |
| Brand: | Texas Instruments |
| Moisture Sensitive: | Yes |
| Operating Supply Voltage: | 1.8 V to 5.5 V |
| Product Type: | Op Amps - Operational Amplifiers |
| Factory Pack Quantity: | 2000 |
| Subcategory: | Amplifier ICs |
| Unit Weight: | 0.002018 oz |
The OPA314 family of single-, dual-, and quad-channel operational amplifiers represents a new generation of low-power, general-purpose CMOS amplifiers. Rail-to-rail input and output swings, low quiescent current (150 µA typically at 5 VS) combined with a wide bandwidth of 3 MHz, and very low noise (14 nV/√Hz at 1 kHz) make this family very attractive for a variety of battery-powered applications that require a good balance between cost and performance. The low input bias current supports applications with MΩ source impedances.
The robust design of the OPA314 devices provides ease-of-use to the circuit designer: unity-gain stability with capacitive loads of up to 300 pF, an integrated RF/EMI rejection filter, no phase reversal in overdrive conditions, and high electrostatic discharge (ESD) protection (4-kV HBM).
These devices are optimized for low-voltage operation as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V), and are specified over the full extended temperature range of –40°C to 125°C.
